Commissioning; Introduction; Purpose Of The Manual; For Your Safety - Mondolfo Ferro Startline S 524 Manuel D'utilisation

1. COMMISSIONING

1.1 INTRODUCTION

1.1.a. PURPOSE OF THE MANUAL
The purpose of this manual is to provide the instructions necessary for optimum operation,
use and maintenance of your machine. If you sell this machine, please deliver this manual
to the new owner. In addition, in order to provide the customers with any necessary safety
information, please ask the new owner to complete and return to the manufacturer the
ownership transfer form attached to the previous page of this manual. Alternately, the new
owner can send an email to info@mondolfoferro.it.com.
This manual presumes that the technicians have a thorough understanding of rims and
tyre identification and maintenance. He/she must also have a thorough knowledge of the
operation and safety features of all associated tools (such as the rack, lift, or floor jack)
being utilized, and have the proper hand and power tools necessary to work in a safe
manner. The first section explains the basic information regarding the equipment. The
following sections contain detailed information regarding the equipment, procedures and
maintenance. Italics are used to refer to specific parts of this manual that offer additional
information or clarifications. These references must be read in order to obtain information
additional to the instructions provided. The owner of the equipment is solely responsible
for enforcing safety procedures and arranging technical training. The equipment must
only be used by qualified, specifically trained technicians. The owner or management
is exclusively responsible for storing the documentation relative to qualified personnel.
The equipment is designed for mounting, demounting and inflating tyres for light vehi-
cles (cars, motorcycles, not trucks) with a maximum external diameter of 43 inches and a
maximum width of 14 inches.
Additional copies of this manual and the documentation enclosed with the machine can
be requested from the manufacturer, specifying the machine type and serial number.
WARNING: Design details are subject to change. Some illustrations may vary slightly in
appearance from the machine you have.

1.2 FOR YOUR SAFETY

DESCRIPTION OF THE HAZARD
These symbols identify situations that could be detrimental to your safety and/or cause
equipment damage.
DANGER:
Startline S 424-S 421-S 521-S 524 Operator manual
DANGER
It indicates an imminent dangerous situation that, if not
avoided, could lead to serious injury or death.
UK
87