Recommendations For Use; Description Of Controls; Operation - Angelo Po FX61 E3 Manuel D'installation Et Mode D'emploi

RECOMMENDATIONS FOR USE

IMPORTANT _________________________
The rate of accidents resulting from
the use of appliances depends on many
factors which cannot always be predicted
and controlled. Some accidents may be
caused by unpredictable environmental
factors, while others are caused by misuse
or abuse. Being familiar with the appliance
and the normal operating modes will help
reduce the occurrence of accidents or
errors.
Use only as intended by the manufacturer
and do not tamper with any devices to obtain
operations other than those intended.
Before each use, make sure all safety
devices are fully installed and functional.
In addition to complying with the above
requirements, users must apply all safety
regulations and read the description of
the controls and the start-up instructions
carefully.
Immediately report
observed or deterioration of the components
or parts of the appliance.
ask for help from a more experienced user
or call an authorized service agent for
additional help.

DESCRIPTION OF CONTROLS

The illustration shows the appliance's control panels,
while the list details the descriptions and functions of
the individual controls.
A. Digital display: displays the selected mode of
operation and alarm codes.
B. Function enabling button: enables the function
shown on the display.
C. Back button: cancels the current operation and
returns to the previous page.
D. Reset button: resets the alarms (beepers and
lights).
E. "START-STOP" button: starts or ends the
selected program cycle, shown on the display
(cooking cycle, washing cycle, etc.).

OPERATION

any irregularities
If necessary,
F. Knob: Used to select the function required
or modify values. To select one of the zones
required (function or value) turn the knob
clockwise or counter-clockwise
• Clockwise: scrolls "downwards" through
zones or increases the value shown.
• Counter-clockwise: scrolls "upwards" through
zones or decreases the value shown.
After selecting the function required or the value,
press the knob to confi rm and save the function or
value.
G. On/off button: turns the appliance's electricity
supply on and off (I=ON; O=OFF).
H. USB port: used to connect a remote data
storage unit to the appliance.
L. HELP button: gives information on the function
that is being used.
A
C
D
F
H G
Combination Oven Installation and Operation Manual
Section 5
Operation
B
L
E
25