Cooking Cycle Start And End Procedure - Angelo Po FX61 E3 Manuel D'installation Et Mode D'emploi

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Section 5
Operation
10. Press the "emergency rinse cycle" button and
wait for the cleaning cycle to end.
11. Press the button to return to the previous page.
COOKING CYCLE START AND END
PROCEDURE
To start a cooking cycle (in manual or programmed
mode), do the following;
1. Switch on the appliance (see page 26).
2. Select the cooking type and set all the values
necessary for correct operation (see page 32).
3. Press the button.
If the page appears on the display, the preheating
function is on.
Wait for the preheating stage to be completed before
placing the foods inside the cooking chamber.
At the end of the preheating stage, the display
will show page.
68 Combination Oven Installation and Operation Manual
>>>
>>>
>>>
Cooking chamber
temperature
Preheating temperature
>>>
rinse in
emergency
Time

Publicité

Chapitres

Table des Matières
loading

Table des Matières