Switching The Appliance On And Off - Angelo Po FX61 E3 Manuel D'installation Et Mode D'emploi

Section 5
Operation
SWITCHING THE APPLIANCE
ON AND OFF
Proceed as follows:
Lighting
1. Operate the appliance's master switch to
connect it to the electrical power supply.
2. Turn on water supply valve.
3. Press button (G) to turn on the appliance.
4. Display (A) comes on, after a few seconds it
shows the page.
5. Press OK to reset and go to the next page.
IMPORTANT
The N value of the hours is the residual
cooking time between one wash and the
next (max.12 h - min. 1h).
The display will show page.
6. Press OK to go to the main functions of the
appliance.
IMPORTANT
The Y value of the hours is the residual water
introduction time in the chamber during
a cooking process available between one
descaling and the next (max 15h - min 1h).
Turning off
IMPORTANT
Always switch off the appliance after use.
7. Press button (G) to switch off the appliance.
8. Turn off water supply valve.
9. Cut off main electrical supply using the
appliance's master switch.
26 Combination Oven Installation and Operation Manual
A
>>>
>>>
G