Engaging And Disengaging The Chain Brake; Engaging The Chain Brake; Disengaging The Chain Brake - Stihl MSA 120 C Notice D'emploi

English
► Switch off the chain saw, engage the chain brake and
remove the battery.
► Place your saw on a level surface so that the oil tank cap
faces up.
► Use a damp cloth to clean the tank cap and the area
around it.
► Turn the tank cap counterclockwise until it can be
removed.
► Remove the oil tank cap.
► Fill up with chain oil, taking care not to spill any oil and do
not overfill the tank.
► Place the tank cap on the tank opening.
► Press the tank cap down, turn it clockwise as far as stop
and tighten it down firmly.
The oil tank is closed.
68

8 Engaging and Disengaging the Chain Brake

8 Engaging and Disengaging the Chain
Brake
8.1

Engaging the Chain Brake

The saw is equipped with a chain brake.
The chain brake is activated by the inertia of the front hand
guard if the kickback force is high enough or can be engaged
by the operator.
► Push the hand guard away from the handlebar with your
left hand.
The hand guard engages with an audible click. The chain
brake is engaged.
8.2

Disengaging the Chain Brake

0458-716-9621-B