Speed Control; Контроль Скорости - JUKI HZL-G Série Manuel D'instructions

Masquer les pouces Voir aussi pour HZL-G Série:
Table des Matières

Publicité

Speed control / Réglage de la vitesse
Control de la velocidad / Контроль скорости
Slower speed
Vitesse lente
Menos velocidad
болеe мeдленнaя
скорость
Slower speed
Vitesse lente
Menor velocidad
мeдленнee
Faster speed
Vitesse rapide
Mayor velocidad
быcтрee
27
Faster speed
Vitesse rapide
Más velocidad
болеe быcтрaя скорость
Speed controller
Maximum sewing speed can be freely set by the speed controller.
Variateur de vitesse
La vitesse maximum peut être librement sélectionnée grâce au
variateur de vitesse.
Regulador de velocidad
Puede ajustarse libremente la velocidad máxima de costura mediante
el regulador de velocidad.
Регулятор скорости
Максимальную скорость выполнения строчки можно задать при
помощи регулятора скорости.
Foot controller
To run the machine, press the foot controller.
The harder you press, the faster the machine sews.
Speed controller will set the maximum sewing speed.
Pressing harder → faster speed
Pressing weaker → slower speed
* Always clean the foot controller.
It is important that you do not place any objects on the foot
controller as it may cause injury to the user and may cause
malfunctions.
Rhéostat
Pour faire démarrer la machine appuyez sur la pédale.
Plus vous appuyez, plus vite la machine coudra.
Le variateur de vitesse programmera la vitesse maximum.
Pression forte → vitesse la plus rapide
Pression faible → vitesse la plus lente
* Toujours néttoyer le rhéostat.
Il est important de ne jamais placer d'objet sur le rhéostat cela peut
causer un dommage à l'utilisateur ou bien occasionné un mauvais
fonctionnement.
Pedal
Para operar la máquina, pulse el pedal.
Cuanta más intensidad aplique al pedal, a mayor rapidez coserá la
máquina.
El regulador de velocidad establecerá la velocidad máxima de
costura.
Mayor presión → Mayor velocidad
Menor presión → Menor velocidad
* Limpie siempre el pedal.
Es importante no colocar objetos en el pedal, porque puede provocar
lesiones al usuario y pueden producirse anomalías.
Ножной регулятор
Для запуска машины нажмите на ножной регулятор.
Чем больше нажим, тем быстрее работает машина.
Регулятор скорости установит максимальную скорость
выполнения строчки.
Нажим сильнее → скорость выше
нажим слабее → скорость ниже
* Всегда содержите ножной регулятор в чистоте.
Важно не размещать какие-либо предметы на ножном
регуляторе, так как это может привести к травме оператора и
неисправности машины.

Publicité

Table des Matières
loading

Table des Matières