Cleaning; Pre-Requisites; Safety - Bodet NTP/WIFI Notice D'installation

EN

1.2 Cleaning

Use an anti-static product identical to that in the cleaning kit provided.
Never use alcohol, acetone or other solvents, which may damage the clock's casing or glass.

1.3 Pre-requisites

To configure the clock you must install BODET Detect software or the application BODET Detect
Mobile if you possess a Androïd smartphone. This software and application are available to
download for free on the BODET website www.bodet-time.com.
Select a location to install the clock, preferably away from sources of electrical interference, such
as transformers.

1.4 Safety

This product has been carefully designed to meet your needs in accordance with ISO 9001 quality
standards.
Before beginning to install and configure the NTP/Wi-Fi Style clocks, carefully read the various
safety instructions.
Ensure that you observe the safety warnings and precautions at all times during the installation,
operation and maintenance of your product.
Installing the equipment
The installation and maintenance of this device must be performed by accredited personnel. This
product must not be installed by unauthorised users / operators.
Electrical installation of the equipment must comply with applicable electrical standards.
Opening the equipment
There are no user-repairable parts inside this equipment. Please contact BODET customer support
if the equipment needs to be repaired.
Never open the product while the power is apllied to the clock.
Turn off the power supply upstream (circuit breaker) before any intervention.
Earth connection
This equipment is a Classe 2 equipement therefore does not need to be grounded.
.
7