Bodet NTP/WIFI Notice D'installation page 22

7- If the connection is succesful, enter again the IP
address of the access point (192.168.100.1) in the
browser. The clock web server is now accessible and
its Home page is displayed in on the PC screen.
Note: the clock is not yet connected to you network.
8- To chose thenetwork open the «Wi-Fi
Configuration» page
Station mode « Scan »
By default the «Wi-Fi Configuration» opens in
the « Scan » mode which inventories
automatically all the Wi-Fi network.
You can click on «Scan» to refresh the list.
Select the desired Wi-Fi network.
(Example TP-Link_FE9C)
9- Enter the password associated with the SSID
(Wi-Fi network) and click on «Connect»
10- Once the connection to the SSID is established the
following message is displayed to confirm the
connection.
11- To continue the parameter setting of the clock either:
- navigate through the pages of the web server and set
all the parameters,
- or connect the PC to the Wi-Fi network by:
* clicking on «here»
* or enter the displayed IP address on the PC web
browser to acces the clock web server.
This procedure must be repeated for each Wi-Fi clock to be configured.
22
EN