Web Interface; Home - Bodet NTP/WIFI Notice D'installation

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

IX

– Web interface

There are two ways to access the web interface to configure the clock:
1) Open a web browser and enter the IP address of the clock in the address bar.
2) Run BODET Detect software and click on
networked clock (refer to the software instructions, ref.: 607548)
BODET Detect software can be used to:
• Detect all clocks on the network
• Configure each clock (individually or by copying the settings for one clock to a group
of clocks)
• Update the clock's software version
• Check clock status
• Access downloaded MIB files
9.1 Home page
The clock web server home page contains general information about the clock.
The information is displayed as follows:
• Product: product type + SF (Single Face) + SUP (Supervised)
• Name: user-defined clock name
• Wi-Fi: Service Set ID to which the clock is connected
• Synchro: synchronisation status ("Strat 3" indicates that the clock is at the 2nd level from
the synchronisation source) + IP address of the server on which the clock is synchronised.
Wi-Fi Example:
Strat 0
GPS antenna
• Local date: current date
• Local time: current time
Strat 1
Time Server
to open the appropriate web server for the
Wi-Fi router
Strat 2
Style 7D
EN
23

Publicité

Table des Matières
loading

Table des Matières