Maintenance Menu - Style 7D-7E - Bodet NTP/WIFI Notice D'installation

7.2 Maintenance menu – Style 7D-7E
+
S
+ Hold down for 3 seconds
Open the « configuration » menu
+
S
+ Hold down for 7 seconds
Software version
S
+
S
+
+
S
+ +
S
+
S
+
S
Display test (tests for correct functioning of all LEDs)
S
End of menu
18
Select synchronisation mode: NTP or independent NTP (ntPI)
« nor » mode:
- If the clock is not configured the message « no Id » is displayed.
- If the clock is configured, the Wi-Fi reception level is displayed:
from 1 to 3:
(horizontal bars)
« Init » mode:
Out of the factory the clock behaves as an Access Point.
Once the clock is configured, the clock access pont is deactivated.
It can be activated again by selecting « Init ».
To exit the « Init » mode and deactivate the Access Point select « nor ».
In the « Init » mode pressing « S » exit the technician menu and display the time.
+ +
...
Resetting the clock (enabled when "rstY" is selected)
Restore to factory settings (enabled when "dF Y" is selected)
or if the Wi-Fi signal is absent
S
S
Exit to T°offset adjustment or Clock restart
Set the T° offset
+ +
...
(Style 7D-7E)
EN