1. Initial checks
Thank you for choosing a BODET clock.
This product has been carefully designed to ensure your satisfaction, adhering to quality
processes ISO9001 and ISO14001.
We recommend that you read this manual and the general safety measures and operating
instructions carefully before handling the clock.
Keep this manual for reference for the lifespan of your clock so that you can refer to it when
necessary.
Data not contractual. Bodet reserves the right to make certain
functional, technical and aesthetic changes to the devices without prior notice.
Failure to observe these instructions may cause irreversible damage and invalidate the
warranty.
In this case, Bodet cannot be held liable.
These instructions relate to the "NTP Wi-Fi" models.
For other models, please refer to the corresponding instructions.
1.1 Unpacking the clock
Carefully unpack the clock and check the contents of the package. These should include :
– the clock (with a label showing the product's MAC address) and this manual.
– a screw with a wall pin.
Note: On the back of the movement, a label specifies the default configuration of the clock.
1.2 Cleaning the clock
Use an anti-static product. Never use alcohol, acetone or other solvents,
which may damage the clock's casing or glass.
1.3 Pre-requisites
To put the clocks into service, install the BODET Detect software on a laptop or BODET Detect
Mobile from the Google Play Store (QR code) if you have an Android smartphone.
This software is available to download for free on the Bodet website at www.bodet-time.com.
EN
5