Bodet NTP/WIFI Notice D'installation page 31

• Server access: This setting is used to trigger an alert if a user connects to the web server
of the clock.
• Authentication failure: This setting is used to trigger an alert if a user sends an incorrect
ID to the web server of the clock.
• Periodic Status: This setting is used to verify that the device is still working correctly
(in case alerts are "lost"). This verification is carried out at a set frequency.
• Low WiFi Signal: Indicates that the Wi-Fi signal is présent but weak.
• Long Disconnection: Loss of Wi-Fi network during several days. The alarm is triggered
when the network is available again.
Information: The errors or faults reported are minor and a visit by a maintenance
technician to correct the fault is not strictly necessary.
Warning: The errors or faults reported are significant and a visit by a maintenance technician
to correct the fault is necessary.
Critical: The errors or faults reported are serious and an urgent visit by a maintenance
technician to correct the fault is necessary.
is used to save any settings made on this page.
is used to send a trap status to all of the configured SNMP managers to ensure that
supervision is configured correctly.
EN
31