I - Initial Checks; Unpacking The Clock; Cleaning; Pre-Requisites - Bodet Style Mondiale NTP 947 17x W3 Notice D'installation Et De Mise En Service

I –
Initial checks
Thank you for choosing a BODET clock.
This product has been carefully designed, adhering to ISO 9001 quality processes, to ensure your satisfaction.
We recommend that you read this manual and the general safety measures and operating instructions carefully before
handling the clock.
Retain this manual for reference for the lifespan of your clock.
The information supplied is non-binding; Bodet reserves the right to make changes to equipment, including functional,
technical and aesthetic changes or changes to colours, without notice. This manual presents all possible functions of
Style clocks. These functions depend on the model of your clock.
The illustrations in this manual relate to a Style Mondiale 3-city or 7-city clock. With regard to navigation through the
clock menus, viewing and manipulation remain unchanged.
Failure to observe these instructions may cause irreversible damage to the clock and invalidate the warranty.
These instructions relate to the following clocks:
models\ NB of cities
NTP
Specify the LED colour by replacing the "x" in the reference number by: 1 (red), 2 (green), 3 (yellow), 4 (blue) et 5 (white).

1.1 Unpacking the clock

Carefully unpack the clock and check the contents of the package. This should include:
• Style clock,
• 5 screws and 5 wall plugs Ø6x40mm,
• Manual
An identification label is affixed to the top of the clock. Use the URL link shown to download this manual since the web
site www.bodet-time.com.

1.2 Cleaning

Use an anti-static product identical to that in the cleaning kit provided.
Never use alcohol, acetone or other solvents, which may damage the clock's casing or glass.

1.3 Pre-requisites

To programme the clock you must install BODET Detect software (Cf. page 11). This software is available to
download for free on the BODET website www.bodet-time.com.
Note: the BODET clock must be connected to a PoE network socket via a PoE switch or a PoE injector. (802.3af,
class 3: multicast, class 0: unicast).
Bodet recommends the following devices:
• PoE injectors: Zyxel, Tp link, D-Link, HP, Cisco, Axis, ITE Power Supply, PhiHong, Abus, Globtek
• PoE switches: D-Link, HP, Planet, Zyxel, Cisco, NetGear, PhiHong
Select a location to install the clock, preferably away from sources of electrical interference, such as transformers.
4
3 cities 4 cities
947 17x W3 947 17x W4
5 cities 6 cities
947 17x W5 947 17x W6
EN
7 cities
947 17x W7