THIngs
To reMeMber
Sleep mode
If the Thermomix TM31 is connected to mains supply but
not used (speed selector is set to
switch to standby (sleep mode) after approx. 15 minutes.
The display will be blank. To re-activate the appliance
press any button on the control panel. To switch the
Thermomix TM31 to sleep mode press and hold the
button for approx. 2 seconds until "OFF" appears on the
display. The appliance can now be re-activated only by
a short press on the
button. In sleep mode, power
consumption of the Thermomix TM31 is less than 1 W.
If you do not use the Thermomix TM31 for a prolonged
period of time disconnect it from mains power supply.
Electronic motor protection
All recipes in the Thermomix TM31 cookbook have been
developed in such a way that the motor protection will not
activate if all instructions are observed.
But even if quantities are exceeded, the motor is protected
by an automatic switch-off function. In such cases, the
display will show the error message "LOAd". If the motor
has turned off:
• Put the speed selector to
• Remove the mixing bowl from the appliance.
• Reduce the quantity contained in the bowl and/or add
some liquid.
• Wait for approx. 5 minutes (cooling down time).
• Re-insert the mixing bowl.
• Re-start the Thermomix TM31 by means of the speed
selector.
• If the error message "LOAd" is still displayed after the
cooling time please call our customer service.
) it will automatically
.
First time use and high loads
When the appliance is used for the first time it may smell.
If the motor is subjected to a high load during food
preparation, the motor may overheat and start smelling,
in addition to the possibility of an automatic switch-off
of the appliance. This is completely harmless and after the
cooling-down time indicated above, the appliance will
again be in perfect working order.
Things to remember
35