Adjustment Of Preset Time; Temperature Buttons And Illuminated Temperature Indicators - Vorwerk Thermomix TM31 Guide D'utilisation

WorKing WiTh The TherMoMix TM31

Adjustment of preset time

The preset time can be changed at any time during preparation.
Press the – button to reduce the time, press the + button to increase it. If the
speed selector gets turned to / before the preset time has expired, for
example in order to add another ingredient, the display will flash, indicating
the current time, until the speed selector is turned. Food preparation can
thus be continued without difficulty. If you wish again to stop the mixing pro-
1
cedure altogether before the preset time has expired, press both timer but-
tons simultaneously. This will stop the display flashing and you may reset the
time. If no time has been preset and the speed selector is activated the appli-
ance will automatically stop after a maximum time of 60 minutes. After this
time, a buzzer will sound.
Temperature buttons and illuminated
temperature indicators
The temperature buttons can be used to set a temperature between 37°C and
100°C (99°F and 212°F). Each button has a coloured indicator lamp 1 which
will flash after the respective button has been pressed:
37°c (99°f) ..................................................... = green
50°c and 60°c (122°f and 140°f) ................ = yellow
70°c and 80°c (158°f and 176°f) ............... = orange
90°c, 100°c and
Varoma (194°f and 212°f).................................. = red
The illuminated temperature indicators are points of reference. When the
preset temperature has been reached during cooking the indicator lamp stops
flashing and changes to continuous mode. The illuminated indicators show the
temperature that has been reached during the heating process. For example, if
a temperature of 90°C (194°F) is set the related light will start flashing. As the
Thermomix heats up the lights for 37°C, 50°C, 60°C, 70°C and 80°C (99, 122,
140, 158 and 176°F, respectively) light up one after the other until 90°C (194°F)
is reached. At this point this light changes from flash ing to continuous mode.
The illuminated temperature indicators are approximate values.
Always ensure that none of the coloured indicator lights is flashing if you do
not wish to heat or cook food. Otherwise, switch off the heating function by
pressing the button. This will prevent unwanted heating of ingredients in
the mixing bowl if a time has been preset.
30 Working with the Thermomix TM31