General installation instructions
IMPORTANT: The installation of the rope for the
system, as well as the self-pressing of end terminals and tensioning elements may only be
carried out by authorised persons trained by the manufacturer and in possession of a
corresponding training certificate! Special tools are required.
ST QUADRAT Fall Protection S.A. – Your competent partner for fall protection devices – www.lux-top-absturzsicherungen.de/en
LUX-top
®
Minimal erforderliche Gewindelänge = 12 mm /
Minimum mandatory thread - length = 12 mm
Anschlagöse immer bündig mit Gewinde!/
Anchor eyebolt always flush with thread!
LUX-top
page 18 Version 09/2020
FSE
2003:
®
FSE 2003 – traversable