Important Installation Instructions - ST Quadrat LUX-top RVT Manuel D'utilisation

Important installation instructions:

®
 LUX-top RVT
The
special rivets supplied according to the installation instructions. A special rivet tool is
necessary. The installation must be checked appropriately!
 The anchor point must be installed on a substrate with sufficient load bearing capacity
in accordance with the manufacturer's specifications. Always ensure compliance with
the minimum component dimensions and distances from edges given in the
installation instructions!
 The overall construction must be checked on site to ensure it can absorb the
transferred forces!
 The installers must ensure that the surface/substrate is suitable for fixing the anchor
device.
 All connections of the anchor device must be properly and conscientiously installed
and checked according to the manufacturer's specifications. This must be confirmed by
the responsible fitter in the installation documentation form attached to these user
instructions.
 The installation documentation form must be filled in full following installation and
handed over to the building owner/user or kept in a protected place with the parts of
the equipment that are not permanently installed.
 We recommend that you also additionally document proper installation by taking
photos and with other important installation data. We recommend that you use our
documentation app available under
Additional information to that given in the installation documents is provided in EN
795:2012 (Annex A).
 The installation documents verify to the user that the installation has been carried out
properly and provide the basis for subsequent inspections of the anchor device. A copy
should therefore be kept in the building.
 You must comply with the relevant national regulations and the accident prevention
regulations during installation of the anchor device.
 The installers must take measures so that neither components of the anchor device
nor tools can fall from the work area.

In case of sloped surfaces and roofs, snow guards must be installed to prevent loading of
®
LUX-top RVT
the
ST QUADRAT Fall Protection S.A. – Your competent partner for fall protection – www.lux-top-absturzsicherungen.de
may only be installed by qualified installation personnel using the
www.quick-doku.eu
system with snow loads!
page 6 version 04/2018