Installation Distances - ST Quadrat LUX-top FSE 2003 Instructions De Montage Et D'utilisation

• The form for installation documentation must be completed in full after installation and
handed over to the building operator/owner and stored together with any non-
permanently installed parts of the equipment in a safe place.
• It is recommended to also document the proper installation using photos and other
important installation data. For this purpose, we recommend our documentation app
under www.quick-doku.eu
Further information about the installation documents can be found in DIN EN
795:2012 (Appendix A).
• The installation documents provide the user with evidence that the installation has
been carried out properly and provide the basis for subsequent checks on the anchor
device. A copy should therefore be kept in the building.
• During installation of the anchor device, the relevant national regulations and accident
prevention regulations of the respective country must be complied with.
• The fitters must take measures so that neither parts of the anchor device nor tools are
able to fall down from the workplace.
• In case of sloped surfaces and roofs, snow guards must be installed to prevent loading
of the LUX-top
conditions on flat roofs can also damage horizontal safety systems. For this reason, it
is necessary to clear the systems of snow at the latest when the snow height reaches
the horizontal guide to prevent damage.

Installation distances

The distance up to the edge of the building should be selected according to national
regulations and depending on the geometry of the roof.
Anchor devices that are permanently provided on the roof area should be correctly
selected and arranged depending on the type and use of the anchor device taking the
particular features of the roof area into account.
Please find information about the recommended execution and positioning of anchor
points on the roof e.g. in DGUVI 201-056 "Planning principles for anchor devices on
roofs", which was coordinated within the framework of the international group of experts,
D-A-CH-S.
The brochure is
absturzsicherungen.de
National provisions remain unaffected by these recommendations.
If these proposals deviate from national law, the user assumes full legal risk to the extent
of the deviation.
*) When using the system in Germany, the information provided in the national technical approval Z-14.9-789
must be observed.
ST QUADRAT Fall Protection S.A. – Your competent partner for fall protection devices – www.lux-top-absturzsicherungen.de/en
*)
® FSE 2003 system with snow loads! In rare cases, extreme weather
:
*)
available to download
among other places.
page 7 Version 09/2020
*)
free of charge at www.lux-top-