Installation Instructions - ST Quadrat LUX-top SDA-Z II Manuel D'utilisation

Installation instructions:

The ®
 LUX-top SDA
fixing materials supplied according to the installation instructions and must be checked
appropriately!
 The anchor point must be installed on a substrate with sufficient load bearing capacity
in accordance with the manufacturer's specifications. Always ensure compliance with
the minimum component dimensions and distances from edges given in the
installation instructions!
 The overall construction must be checked on site!
 The installers must ensure that the surface/substrate is suitable for fixing the anchor
device.
 All connections of the anchor device must be properly and conscientiously installed
and checked according to the manufacturer's specifications. This must be confirmed by
the responsible fitter in the installation documentation form attached to these user
instructions.
 The installation documentation form must be filled in full following installation and
handed over to the building owner/user or kept in a protected place.
 We recommend that you also additionally document proper installation by taking
photos and with other important installation data. We recommend that you use our
documentation app available under
Additional information to that given in the installation documents is provided in EN
795:2012 (Annex A).
 The installation documents verify to the user that the installation has been carried out
properly and provide the basis for subsequent inspections of the anchor device. A copy
should therefore be kept in the building.
 You must comply with the relevant national regulations and the accident prevention
regulations during installation of the anchor device.
 The installers must take measures so that neither components of the anchor device
nor tools can fall from the work area.
Combination with other LUX-top products:
®
 The LUX-top SDA
temporary horizontal flexible anchor lines to EN 795 Type C. In doing so the strain of
®
the LUX-top SDA
instructions of the respective temporary system!
ST QUADRAT Fall Protection S.A. – Your competent partner for fall protection solutions – www.lux-top-absturzsicherungen.de
may only be installed by qualified installation personnel using the
www.quick-doku.eu
product can be used with temporary horizontal anchor devices /
must not exceed 12 kN. In this case, note and follow the user
6 Version 01/2017