Symbols And Markings - ST Quadrat LUX-top FSE 2003 Instructions De Montage Et D'utilisation

LUX-top
STANDARDS
LUX-top ® FSE 2003
CEN/TS16415:2013

SYMBOLS AND MARKINGS

A label must be attached and must contain the following information:
· Type designation:
Number of the relevant standard:
·
· Name or logo of the manufacturer/distributor:
· Manufacturer's serial number / year of construction:
· Max. permitted number of persons:
· Symbol indicating that the user instructions must be observed:
The legibility of this product labelling must be checked following installation and during
the specified mandatory annual inspection!
If the labelling is no longer accessible after installation, it is recommended to attach an
additional label close to the anchor device!
Manufacturer:
ST Quadrat S.A.
11, rue Flaxweiler
L-6776 Grevenmacher/Potaschberg
Luxembourg
Notified body used at the time of the type test:
DEKRA Testing and Certification GmbH - Dinnendahlstraße 9, D – 44809 Bochum
ST QUADRAT Fall Protection S.A. – Your competent partner for fall protection devices – www.lux-top-absturzsicherungen.de/en
® FSE 2003
was tested and certified according to DIN EN 795:2012 Type C +
page 19 Version 09/2020
DIN EN 795:2012 Type C + CEN/TS16415:2013
LUX-top ® FSE 2003
XX/20XX
XX