Preparation - Mesto 3561 Série Mode D'emploi

EN

Preparation

Observe the instructions in the section entitled „Safety".
The device must be in an upright position.
into the tank.
1. Pull up the red button on the safety valve [12] until all excess pressure is released from
the tank. (Fig. 4).
2. Press the pump handle [13] down and turn it counterclockwise.
3. Unscrew the pump [2] from the tank [1]. (Fig. 6).
+
4. Add the spraying liquid to the tank [1] (Fig. 7).
5. Screw the pump [2] into the tank [1]. (Fig. 9).
6. Press the pump handle [13] down and turn it clockwise.
7. Generate the required pressure
+
8. Press the pump handle [13] down and turn it counterclockwise.
(Fig. 5).
(Fig. 10).
in the tank [1] (Fig. 11).
(Fig. 5).
16
ENGLISH