Preparation - Mesto PROFI 3275 Mode D'emploi

GB IRL
Technical data
Type of device
Max. filling amount
Total contents
Max. spraying pressure
Max. operating temperature
Weight when empty
Gross weight max.
Material of tank
Where device is carried
Technical residual quantity
Max. volume flow
Recoil force
Pressure change from 0 to 3 bar
Table 1
Assembly
1. Fasten the carrying strap [7] on the tank [1]. (Fig. 2)
2. Push the hose [3] into the fixture [9] and secure it with the cap nut. (Fig. 4)
3. Push the hose [3] onto the shut-off valve [6] and secure it with the cap nut. (Fig. 4)
4. Screw the spray wand [5] onto the shut-off valve [6]. (Fig. 4)
Checks
Visual inspection: Check that tank [1], pump [2], hose [3], shut-off valve [6], piston
pressure gauge[8] and spray wand with nozzle [5]are undamaged. (Fig. 1, 3 and 4)
Pay special attention to the connections between the tank – hose and the hose – shut-
off valve and to the condition of the pump threading and spray wand.
Pump up the empty device to 2 bar (Fig. 10).
No leaks:
The pressure must not decrease more than 0.5 bar within 30 minutes.
►
Function: Pull up the piston pressure gauge [8]. (Fig. 3)
The pressure must dissipate.
►
Using the wheel lock [12] the lever on the shut-off valve [6] can be locked and
unlocked. Unintentional spraying is prevented after locking [12b].
If required, reset the wheel lock [12a] and activate the shut-off valve [6].
►
(Fig. 12)
The shut-off valve must open and close.
►
Have damaged parts or parts that do not work properly repaired immediately by our
customer service department or by service partners authorized by us.

Preparation

Observe the instructions in the section entitled "Safety".
The device must be in an upright position.
If filling the tank from a water line, ensure that the line or a hose does not project
into the tank.
1. Pull up the red button on the piston pressure gauge [8] until all excess pressure is
released from the tank. (Fig. 3)
AUS USA
PROFI 3275
5 l
8 l
1.8 kg
6.8 kg
15
NZ CDN
PROFI 3270
10 l
12.5 l
3 bar
40 ° C
2.8 kg
12.8 kg
polyethylene
on the side
< 0.07 l
1 l/min
< 5 N
min. 5000 x
IND