Mesto 3561 Série Mode D'emploi page 13

EN
Welcome and congratulations
on purchasing your new quality product. Thank you for the trust you have shown in our brand.
Please contact us if your expectations are not met.
Make certain to read the instructions for use before using the device!
Keep the instructions for use in a safe place where they can be easily found.
The instructions for use are an integral part of the device and must be enclosed
when the device is passed on. Particular safety measures are required when
working with the device.
Usage
Spraying devices 3561.. and 3581.. are designed for the spraying of forming oils and
devices can also be used for solvent-free and chloride-free, neutral cleaning agents as
well as low-viscosity, solvent-free emulsion paints and paints.
Improper use may result in dangerous injuries and environmental damage.
Follow the safety notices and data sheets of the substance manufacturers before each
preparations. We will be happy to advise you on what best suits your needs.
Observe the legal and statutory regulations applicable in your country.
The device may be used outdoors or in well ventilated rooms only. Have the salesperson
Not suitable for
• Combustible liquids
• Corrosive substances (certain disinfecting and impregnating agents, acids and bases)
• Liquids containing ammonia
• liquids at temperatures above 50 °C (122 °F)
• Wetting agents (surfactants), solvents, and liquids containing solvents which can cause
or promote cracking in the applied plastics.
• Viscous or sticky liquids or liquids that form residues (dyes, greases)
• for storing and holding liquids
• as an eyewash.
13
ENGLISH