Preparation - Mesto 3552 Série Mode D'emploi

EN
Function:
2. Activate the pump lever [11].
+
Have damaged parts or parts that do not work properly repaired immediately by our
customer service department or by service partners authorized by us.

Preparation

Observe the instructions in the section entitled „Safety".
The device must be in an upright position.
into the tank.
+
+
3. Screw the cover [19] onto the tank.
Spraying
Observe the instructions in the section entitled "Safety".
Operate the device only while it is vertical or suspended upright and nearly vertical.
Avoid allowing drops of spray to drift onto areas that are not being treated.
Observe the instructions of the spray product manufacturer!
1. Place the device on its back.
2. Using the pump lever [11], pump slowly and regularly to maintain a continuous spraying
pressure.
+
+
Nozzle
Pressure
2.0 bar (29.0 psi)
6.0 bar (87.0 psi)
1.1 80015
0.56 0.48
0.96 0.85
17
8002, 9002 8004 (Basic equipment)
0.65
1.13
ENGLISH
1.29
2.23