Preparation - Mesto 3565 Mode D'emploi

EN

Preparation

The device must be in an upright position.
into the tank.
the tank. (Fig. 4).
2. Press the pump handle [13] down and turn it counterclockwise.
3. Unscrew the pump [2] from the tank [1]. (Fig. 6).
+
To ensure the pump remains clean during storage, we recommend you attach the
pump to the pump holder [8]. (Fig. 7).
+
5. Screw the pump [2] into the tank [1].
6. Swivel in the pump holder [8].
7. Press the pump handle [13] down and turn it clockwise.
8. Generate the required pressure
+
9. Press the pump handle [13] down and turn it counterclockwise.
Ensure that the initial pressure is not higher than 15 bar (218 psi).
8. When the required pressure has built up, remove the compressed-air
hose [17].
.
(Fig. 7).
.
.
(Fig. 10).
in the tank [1] (Fig. 11).
.
(88 psi)
17
ENGLISH
(Fig. 12).