Technical Data; Safety Instructions - Grizzly AGS 72-2 Lion Traduction De La Notice D'utilisation Originale

GB

Technical data

Unit
Motor voltage ................................7,2 V
Rated speed ............................ 1000 min
Protection class ..................................... III
Protection category............................IPX1
Grass-trimming blade
Cutting width .............................. 80 mm
Shrub-trimming blade
Cutting length .......................... 160 mm
Length of blades....................... 200 mm
Distance between teeth... approx. 8 mm
Weight (without telescopic arm) .................
.............................................approx 0.85 kg
Sound power level (L
guaranteed .............................. 89 dB(A)
Function shrub trimmer
Sound power level (L
measured ....... 86,0 dB(A); K
Sound pressure level
(L ) .................75,0 dB(A), K
pA
Vibration (a )
n
at handle ...........1.942 m/s
Function grass trimmer
Sound power level (L
measured ....... 82,4 dB(A); K
Sound pressure level
(L ) .................76,3 dB(A), K
pA
Vibration (a )
n
at handle .............1.38 m/s
Battery (Li-Ion)
Nominal voltage ............7,2 V
Loading time..................... approx. 3-5 h
Charger ....................YLS0041A-E095038
Voltage input ..........................100-240 V~,
....................................................50/60 Hz
Input current ..................................... 0,3 A
Voltage output................................... 9,5 V
Recharging current ....................... 380 mA
Protection class .................................
Protection category............................ IP20
86
)
wA
)
wA
=3 dB(A)
wA
=3 dB(A)
pA
, K=1.5 m/s
2
)
wA
=3 dB(A)
wA
=3 dB(A)
pA
2 , K=1.5 m/s
1,3 Ah
The noise and vibration levels have been
calculated according to the norms stated
in the conformity statement. Technical and
optical alterations to serve progress may
-1 be made without notice. All measurements,
instructions and other data given in this
manual are therefore given without guar-
antee of correctness. Legal claims made
on the basis of this manual are therefore
excluded.
The stated vibration emission value was
measured in accordance with a standard
testing procedure and may be used to
compare one power tool to another. The
stated vibration emission value may also
be used for a preliminary exposure assess-
ment.
Warning: The vibration emission
value may differ during actual use
of the power tool from the stated
value depending on the manner in
which the power tool is used.Safety
2
precautions aimed at protecting the
user should be based on estimated
exposure under actual usage condi-
tions (all parts of the operating cycle
are to be considered, including, for
example, times during which the
2 power tool is turned off and times
when the tool is turned on but is run-
ning idle).

Safety Instructions

This unit can cause serious in-
jury if not used correctly. Before
using the unit, carefully read
through the instruction manual
II and familiarise yourself with all
of its controls.