Technical Data; Safety Instructions - Grizzly AGS 108 Lion Traduction De La Notice D'utilisation Originale

GB

Technical data

Unit
Motor voltage ..............................10.8 V
Rated speed ............................ 1300 min
Protection class ..................................... III
Protection category............................IPX1
Grass-trimming blade
Cutting width ............................ 100 mm
Shrub-trimming blade
Cutting length .......................... 160 mm
Distance between teeth... approx. 8 mm
Weight (incl. accessories) ...approx 0.93 kg
For grass shear function:
Sound pressure level
(L ) ..................... 79.1 dB(A), K
pA
Sound power level (L
guaranteed .............................. 89 dB(A)
measured ............86,5 dB(A); K
Vibration (a )
h
at handle .............2.36 m/s
For hedge trimmer function:
Sound pressure level
(L ) ..................... 72.7 dB(A), K
pA
Sound power level (L
guaranteed .............................. 89 dB(A)
measured ............84.4 dB(A); K
Vibration (a )
h
at handle ...........4.046 m/s
Battery (Li-Ion) .................. SI-LA-108-1E
Nominal voltage ............10.8 V
Loading time..................... approx. 3-5 h
Charger ................... YLS0121A-E136050
Voltage input ..100-240 V~; 50/60 Hz; 0.5 A
Voltage output.............................13.6 V
Recharging current ....................... 500 mA
Protection class .................................
Protection category............................ IP20
72
=3 dB
pA
)
WA
=3 dB
WA
, K=1.5 m/s
2
=3 dB
pA
)
WA
=3 dB
WA
2 , K=1.5 m/s
, 2 Ah
The noise and vibration levels have been
calculated according to the norms stated
in the conformity statement. Technical
and optical alterations to serve progress
may be made without notice. All measure-
-1
ments, instructions and other data given
in this manual are therefore given without
guarantee of correctness. Legal claims
made on the basis of this manual are
therefore excluded.
The stated vibration emission value was
measured in accordance with a standard
testing procedure and may be used to
compare one power tool to another. The
stated vibration emission value may also
be used for a preliminary exposure as-
sessment.
Warning: The vibration emission
value may differ during actual use
of the power tool from the stated
2
value depending on the manner in
which the power tool is used.Safety
precautions aimed at protecting the
user should be based on estimated
exposure under actual usage condi-
tions (all parts of the operating cy-
cle are to be considered, including,
for example, times during which the
2 power tool is turned off and times
when the tool is turned on but is
running idle).

Safety Instructions

This unit can cause serious in-
jury if not used correctly. Before
using the unit, carefully read
through the instruction manual
and familiarise yourself with all
II
of its controls.