Further Safety Directions - Grizzly AGS 72-2 Lion Traduction De La Notice D'utilisation Originale

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 21
GB
to hold on to material which is to be
cut. Only remove trapped clippings
when the tool is switched off. One mo-
ment of carelessness in the usage of the
hedge trimmer can lead to severe injury.
b) Carry the hedge trimmer at the han-
dle with an idle blade. Always pull on
the protective cover during transport
and storage of the hedge trimmer.
Careful handling of the tool reduces
the risk of injury from the blade.
c) Hold the power tool only on the insu-
lated handle surfaces, as the cutting
blade may come into contact with
concealed power cables. Contact be-
tween the cutting blade and a live cable
may render metallic components live
and result in an electric shock.
d) Before the work, search the hedge
for concealed objects, e.g. cable etc.
To avoid damaging the equipment.
e) Hold the hedge trimmer correctly, e.g.
with both hands on the handles, if
there are two handles. Loss of control
of the equipment may result in injuries.
f)
Wear suitable clothing and work
clothes when working with the
equipment. Do not hold the equip-
ment by the cutting blade or lift it
on the cutting blade. Contact with
the cutting blade can cause injuries.

2) FURTHER SAFETy DIRECTIONS

For your personal safety:
Wear suitable work clothes such as
boots with non-slip soles, sturdy long
trousers, gloves and goggles. Hear-
ing protection must be used in case
the device is used over prolonged pe-
riods of time. Do not wear long flow-
ing clothing or jewellery, as this may
be caught by moving parts. Do not
use this tool while walking barefooted
90
or while wearing open sandals.
a) Only switch on the tool when
hands, feet and all other body parts
are at a secure distance to the tool.
Risk of injury from cuts.
b) Take care that you do not injure
your hands and feet with the cut-
ting elements.
c) Remove the power supply unit be-
fore working with the equipment.
Do not use extension cables. The
power supply unit is to be used
only in enclosed spaces. Water en-
try increases the risk of electric shock.
d) Do not use the shrub cutter in com-
bination with the telescopic shaft.
There is a risk of cut wounds.
e) The tool is designed to trim
hedges. Do not use the tool to cut
branches, hard wood or other. To
avoid damaging the equipment.
f)
Do not attempt to dislodge a blocked/
trapped blade before switching the
tool off. There is a risk of injury.
g) Always switch off the tool and remove
the battery (if applicable)
- if you leave the tool unsupervised
- before removing jams
- before control- maintenance- or
cleaning tasks
- if you have come into contact with
a foreign object
- whenever the machine starts to
vibrate uncontrollably
Like upper shown to avoid accidents
and injuries.
3) SPECIAL SAFETy DIRECTIONS
FOR BATTERy-OPERATED TOOLS
a) Do not subject the battery to strong
sunlight over long periods and do not
leave it on a heater. Heat damages the

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Ags 72-2 lion set

Table des Matières