Technical Data; Safety Instructions - Grizzly AGS 3680 D-Lion Traduction De La Notice D'utilisation Originale

GB

Technical data

Unit
Motor voltage ................................3.6 V
Rated speed ............................ 1000 min
Protection class ..................................... III
Protection category............................ IP20
Grass-trimming blade
Cutting width .............................. 73 mm
Shrub-trimming blade
Cutting length .......................... 120 mm
Distance between teeth... approx. 8 mm
Weight (incl. accessories) ...approx 0.85 kg
Sound pressure level
(L ) ....................57 dB(A), K
pA
Sound power level (L
guaranteed .............................. 92 dB(A)
measured ....... 79.1 dB(A); K
Vibration (a )
n
at handle .............1.39 m/s
Battery (Li-Ion)
Nominal voltage ............3.6 V
Loading time..................... approx. 3-5 h
Charger
.................................DK-MGB-48
Voltage input ......................
Nominal consumption ......................... 8 W
Voltage output................................... 4.8 V
Recharging current ....................... 450 mA
Protection class .................................
Protection category............................IPX0
The noise and vibration levels have been
calculated according to the norms stated
in the conformity statement. Technical
and optical alterations to serve progress
may be made without notice. All measure-
ments, instructions and other data given
in this manual are therefore given without
guarantee of correctness. Legal claims
made on the basis of this manual are
therefore excluded.
70
=3 dB(A)
pA
)
wA
=3 dB(A)
wA
, K=1.5 m/s
2
1.3 Ah
230 V~, 50 Hz
The stated vibration emission value was
measured in accordance with a standard
testing procedure and may be used to
compare one power tool to another. The
-1 stated vibration emission value may also
be used for a preliminary exposure assess-
ment.
Warning: The vibration emission
value may differ during actual use
of the power tool from the stated
value depending on the manner in
which the power tool is used.Safety
precautions aimed at protecting the
user should be based on estimated
exposure under actual usage condi-
tions (all parts of the operating cycle
are to be considered, including, for
example, times during which the
power tool is turned off and times
2
when the tool is turned on but is run-
ning idle).

Safety Instructions

This unit can cause serious in-
jury if not used correctly. Before
using the unit, carefully read
through the instruction manual
II and familiarise yourself with all
of its controls.