Horizon Fitness ADVENTURE 1 Guide De Montage page 38

USING YOUR MEDIA PLAYER
1) Connect the included AUDIO ADAPTOR CABLE to the AUDIO IN JACK on the left of the console and the headphone jack
on your media player.
2) Use your media player buttons to adjust song settings.
3) Remove the AUDIO ADAPTOR CABLE when not in use.
ENERGY SAVER (STANDBY MODE)
This machine has a special feature called Energy Saver mode. This mode is NOT automatically activated. When
Energy Saver mode is activated, the display will automatically enter standby mode (Energy Saver mode) after 15 minutes
of inactivity. This feature saves energy by disabling most power to the machine until a key is pressed on the console.
This feature can be turned on or off in the engineering menu.
To enter the engineering menu, press and hold the INCLINE
navigate to SWITCH fUNCTION and press ENTER. Press ENTER to select Energy Saver mode, use
SAVE ON or Off. Press and hold STOP for 3-5 seconds to exit SWITCH fUNCTION. Press and hold STOP again for 3-5
seconds to exit the engineering menu.
24
key and SPEED key for 3-5 seconds. Use to
to select ENERgY
™
PASSPORT MEDIA PLAYER
The Passport player, featuring Virtual Active ™ technology, is a
high-definition experience that uses real destination footage and
matching ambient sounds from stunning destinations around the
world. The ultimate in workout entertainment, Passport lets you
escape the confines of a regular workout routine while enjoying a
dynamic experience.
A Passport player is available for purchase separately from your
Horizon fitness ® retailer.
for more information, go to: www.passportplayer.com
SYNCING CONSOLE WITH PASSPORT
1) Use the arrow keys on the Passport remote to scroll to the setup icon and press select.
2) follow the on-screen prompts to press on the equipment console.
3) The message displayed on screen will notify you if the sync was a success or failure.
25