Chapter 6 Cloning Mode; Entering Cloning Mode - Motorola Solutions DTR Série Guide De L'utilisateur

Chapter 6 Cloning Mode

Cloning mode is used to either add contacts wirelessly to other radios (Private or Groups) or
duplicate all radio settings to new radios (using the optional cloning cable).
NOTE: When selecting contacts to clone over the air (OTC) from the contacts, there is an option to
select ALL. This allows the users to either clone all contacts from one radio to another or to
clone to all contacts.
In the DTR410 cloning also allows all radios to maintain a contact list so that User Name is shown
rather than User ID when receiving voice and data calls.
ID when receiving voice and data calls.

Entering Cloning Mode

1. Press
2. Enter the cloning mode by performing the following steps in sequence:
a. Hold down
b. Press the Left
c. Press
d. Press the Right
e. Hold down
to turn the source radio on.
and press the PTT button three times.
.
.
and press the PTT button three times. The Clone Menu appears.
Clone Menu
Duplicate Rad...
Remote Add C...
Remove Delet...
Select
Reset