Selecting Group Only; Entering Group Members (Privategroup Only For Dtr550/650) - Motorola Solutions DTR Série Guide De L'utilisateur

4-6
2. Scroll to select the desired entry. Press
play returns to the previous screen with the new Home Group Number entered.

Selecting Group Only

NOTE: Selecting Group Only on a radio prohibits the user from initiating PrivateCalls. Private contact
information is still retained by the radio to identify other units, but the user can only return a
PrivateCall during hangtime.
1. Scroll to select Group Only and press
appears.
NOTE: A next to an selection indicates the present selection.
2. Scroll to select the desired entry and press
previous screen with the new Group Only entered.

Entering Group Members (PrivateGroup Only for DTR550/650)

1. Scroll to select Group Members and press
screen appears.
NOTE: A next to the left of the Group Member indicates that those members are already part of
the TalkGroup assigned. If the highlight is on a checked item, the left
Remove. Pressing
If no check mark is present, the entry has not been selected and is not part of the
PrivateGroup already assigned. The left
inserts a check mark.
2. Scroll through the list of Group Members and press
3. When completed, press
the new Group Members entered.
under Change. The Group Only screen
Group Only
Yes
None

No
Select Back
Group Members

Joe Smith
Mike Jones
Bob White
Add Done
under Remove removes the check mark.
under Done. The display returns to the previous screen with
Radio Programming: Adding Contacts
under Select to select the new item. The dis-
under Select. The display returns to the
under Change. The Group Members
changes to Add. Pressing
under Add.
changes to
under Add