Attaching The Mini Keyboard To The Radio; Disconnecting The Mini Keyboard From Your Radio; Entering Text With The Mini Keyboard - Motorola Solutions DTR Série Guide De L'utilisateur

1-10

Attaching the Mini Keyboard to the Radio

When the mini keyboard is attached to your radio, the "Device Attached" message is displayed.
1. Insert the mini keyboard's connector, with the arrow facing up, into your radio's accessory
connector.
2. Fold the mini keyboard over the front of your radio.

Disconnecting the Mini Keyboard from Your Radio

1. Press and hold the buttons on the side of the mini keyboard connector.
2. Pull the mini keyboard connector straight out from your radio's accessory connector. Do not
twist the connector.

Entering Text with the Mini Keyboard

If you have attached the mini keyboard correctly and the keyboard bezel is installed on the keyboard
base you can begin.
Here are some important points to remember when using the mini keyboard.
• Your radio DTR550/650 accepts a maximum of 512 characters in its largest input fields while
the DTR410 accepts a maximum of 80 characters.
• Some of your radio's functions cannot be used simultaneously, just as when you are using your
radios without the mini keyboard.
• Letters and functions shown in white are the default keys.
• All letters are lower case by default. For example, pressing the "Q" key displays "q."
• The Bspc key works as a Back Space key when entering a message.
• The Space key works as a Space Bar.
550
Introduction: Mini Keyboard
Accessory Connector
Keyboard Connector