Garden Example - Stiga Autoclip 221 Manuel D'utilisation

GARDEN EXAMPLE

GARDEN WITH NARROW PASSAGE FOR RE-ENTRY TO THE CHARGING BASE,
< 70cm
References:
A. trees with protruding roots must be delimited by perimeter wire. For making the boundary, in case of a step lower than 70cm
respect to the ground perimeter on the external wire, it is necessary to leave 20cm space between the outgoing and incoming
wire.
B. narrow passage with minimum threshold of 70cm between perimeter wires.
C. recall on wire. It's necessary to position the recall on the ground, otherwise the robot does not pass through a narrow
passage (B) during the re-entry to the charging station.
D. exiting work in secondary area. See "Programming ". It's recommended to set a secondary area because of the garden form
where the narrow passage (B) separates the area (D) respect to that where the recharging station is located.
E. closed area. The passage for reaching the area (E) is too narrow to allow the robot to reach automatically the area.
Programming:
•
secondary areas:
-
area 1:
-
percentage: 50%;
-
direction: counter-clockwise;
-
distance: 50m (distance between the charging station and the point "D");
-
mode: follow wire.
•
closed area: move the robot manually in the closed area at least three times a week.
SECONDARY AREA AND CLOSED AREA
30cm
B
5cm
A
20cm
C
D
39
1m
0 cm 0 cm
E
User's manual
EN