Stiga Autoclip 221 Manuel D'utilisation page 42

EN
A
B
Notes:
because of the garden special shape, it is recommended to set the robot work starting from different points (not always from the
charging station) to optimize the cutting performance.
References:
A - B: exiting work in secondary areas. See "Programming". It's recommended to set two secondary areas to increase the robot
work efficiency. It starts to work from different points of the garden.
Programming:
•
secondary areas:
-
area 1- A:
-
percentage: 30%;
-
direction: clockwise;
-
distance: 30m (distance between the charging station and the point "A");
-
mode: V-Meter.
-
area 2- B:
-
percentage: 30%;
-
direction: counter-clockwise;
-
distance: 30m (distance between the charging station and the point "B");
-
mode: V-Meter.
User's manual
GARDEN SPECIAL SHAPE TO U
30%
30%
40
≥ 2m
≥ 2m
40%