Led Replacement - Napoleon LV38N Instructions D'installation Et D'opération

11.6

LED REPLACEMENT

This appliance comes equipped with an LED strip. If in the event the LED strip needs to be replaced, follow
these instructions.
A. Turn off all electrical supply.
B. Remove the safety screen and glass door, refer to the "SAFETY SCREEN INSTALLATION /
REMOVAL" & "DOOR INSTALLATION / REMOVAL" sections for details.
C. Remove the media tray and burner assembly, refer to the "BURNER REMOVAL" section for details.
D. Unplug the LED strip from the control module.
E. Remove the LED glass by removing the 14 screws securing the LED frame in place, then lift it up and
out of the appliance.
F. Remove the LED strip by removing the four securing screws, replace and reinstall components.
63
LED FRAME
LED GLASS
LED GASKET
LED STRIP
W415-1539 / B / 11.22.16
EN