Burner Removal; Control Module Removal - Napoleon LV38N Instructions D'installation Et D'opération

62
11.4

BURNER REMOVAL

A. Remove the safety screen and glass door, refer to the "SAFETY SCREEN INSTALLATION / REMOVAL"
EN EN
& "DOOR INSTALLATION / REMOVAL" sections for details.
B. Remove the media from the appliance.
C.
Remove the pilot housing by removing the two screws.
D. Remove the 10 screws (5 per side) that secure the media tray in place. Lift the burner assembly up
and out of the appliance.
11.5

CONTROL MODULE REMOVAL

A. Remove the safety screen and glass door, refer to the "SAFETY SCREEN INSTALLATION / REMOVAL"
& "DOOR INSTALLATION / REMOVAL" sections for details.
B. Remove the 2 screws holding the control module in place, unplug and remove.
C. Replace and reinstall components.
W415-1539 / B / 11.22.16
CONTROL MODULE