Introduction; Parts And Service; Nameplate; Delivery - Advance CS7000 Mode D'emploi

ENGLISH / A-3

INTRODUCTION

This manual will help you get the most from your Advance Sweeper / Scrubber. Read it thoroughly before operating the machine. References to
™
"right" and "left" in this manual mean right or left as seen from the driver's seat.
Note: Bold numbers or letters in parentheses indicate an item illustrated on pages A-6 – A-10 unless referred to a specifi c fi gure number.

PARTS AND SERVICE

Repairs, when required, should be performed by your Authorized Advance Service Center, who employs factory trained service personnel, and
maintains an inventory of Advance original replacement parts and accessories.
Call the ADVANCE INDUSTRIAL DEALER named below for repairs or service. Please specify the Model and Serial Number when discussing your
machine.
(Dealer, af x service sticker here.)

NAMEPLATE

The Model Number and Serial Number of your machine are shown on the Nameplate. One nameplate is located on the wall of the operator's
compartment just below the circuit breaker decal. The second nameplate is located on the chassis beneath the recovery tank. This information is
needed when ordering repair parts for the machine. Use the space below to note the Model Number and Serial Number of your machine for future
reference.
MODEL ________________________________________________
SERIAL NUMBER ________________________________________
Note: Reference the separately supplied engine manufacture's maintenance and operator manual for more detailed engine speci cation and
service data.

DELIVERY

Upon delivery, carefully inspect the machine for damage. If damage is evident, contact the trucking company immediately to le a freight damage
claim.
CAUTION!
• Use extreme CAUTION when operating this machine. Be certain that you are thoroughly familiar with all operating instructions
before using this machine. If you have any questions, contact your supervisor or your local Advance Industrial Dealer.
• If the machine malfunctions, do not try to correct the problem unless your supervisor directs you to do so. Have a quali ed
company mechanic or an authorized Advance Dealer service person make any necessary corrections to the equipment.
• Use extreme care when working on this machine. Loose clothing, long hair, and jewelry can get caught in moving parts. Turn the
Key Ignition Switch OFF and remove the key before servicing the machine. Apply the parking brake before getting off of the machine.
Use good common sense, practice good safety habits and pay attention to the yellow decals on this machine.
• Drive the machine slowly on inclines. Use the Brake Pedal (38) to control machine speed while descending inclines. DO NOT turn
the machine on an incline; drive straight up or down.
• The maximum rated incline for sweeping and scrubbing is 17.6% (10°). The maximum rated incline during transport is 21% (12°).
MODIFICATIONS
Modi cations and additions to the cleaning machine which affect capacity and safe operation shall not be performed by the customer or user
without prior written approval from Nil sk Inc. Unapproved modi cations will void the machine warranty and make the customer liable for any
resulting accidents.
revised 2/2016
FORM NO. 56041979 - CS7000 - A-3