A-28 / ENGLISH
LUBRICATING THE MACHINE – FIGURE 11
Once a month, pump a small amount of grease into each grease tting on the machine until grease seeps out around the bearings.
Grease fi tting locations (or apply grease to) (DE):
•
Squeegee Caster Wheel Axle and Pivot
•
Steering Gears – requires speci c grease (Nil sk PN 56510412) Chevron Open Gear Lube 250 NC.
Once a month, apply light machine oil to lubricate the (DF):
•
Squeegee tool end wheels
•
Fuel Tank Cover Latch (Engine models only)
•
Recovery Tank Latch
•
Brake Pedal (parking brake) linkage
FIGURE 11
A-28 - FORM NO. 56041979 - CS7000
revised 8/2015