Connection To The Radiator; Switching On And Self Test - Enraf Nonius Radarmed 650+ Mode D'emploi

7.8.2

Connection to the radiator

The HF-cable is connected to the radiator by means of a "fast" coupling.
7.9

Switching on and self test

 Switch on the unit using the on/off switch [8].
 Immediately after switching on, the unit carries out a self test
Check that:
 all LED's light up briefly;
 at the end of the test a beep can be heard.
Contact your supplier if this is not the case.
081-400-095-49_EN
To plug on the connector
Push on connector
Check to ensure that connector is
secure
To unplug the connector
Pull back ring
Pull out connector
ENGLISH
Page 11 of 19