Gap Between The Main Unit And The Toilet Lid - Toto Washlet KM SW3036 Mode D'emploi

Gap between the Main Unit and the Toilet Lid

Gap between the Main Unit and the Toilet Lid
The toilet lid can be removed for thorough
cleaning.
Unplug the power plug.
1
Remove the main unit.
2
(Page 26)
Remove the toilet lid.
3
Slightly tilt the toilet lid to the front.
: Pull the left side outward.
: Disconnect the hinge from the tab
and pull up.
: Disconnect the right side.
Wipe with a soft cloth that
4
has been soaked in water
and wrung-out thoroughly.
Reinstall the toilet lid.
5
: Join the pin and the hinge on the
right side.
Slightly tilt the toilet lid to the front.
: While pulling out the left side,
: Mount by joining the hinge with the
tab.
* Be careful not to pinch your fi ngers.
Mount the main unit.
6
(Page 28)
Insert the power plug.
7
• The "Power" LED lights up.
Open and close the toilet lid
8
to check the reinstallation.
M08049-1_EN.indd 29 M08049-1_EN.indd 29
(Approximately once a month)
Soft cloth soaked in water
Removing and Reinstalling
Hold with
both hands
Ⓑ
Ⓐ
Ⓔ
Tab
Hinge
Toilet paper, etc.
(May cause damage.)
Ⓒ
Ⓓ
Pin
Hinge
29
10/5/2017 1:09:38 PM 10/5/2017 1:09:38 PM