Maintenance; Main Unit - Toto Washlet KM SW3036 Mode D'emploi

Maintenance

Always disconnect the power plug from
the outlet before cleaning, maintenance
or inspection.
(Failure to do so may cause electric shock
or malfunction, resulting in a breakdown.)
For safety, disconnect the
power plug before cleaning
or maintenance.
Do not use a dry cloth
or toilet paper on plastic
parts.
(May cause damage.)
*1 Except when using "Wand cleaning".
26
M08049-1_EN.indd 26 M08049-1_EN.indd 26
WARNING
*1
The "Power"
LED goes off.
Lit OFF

Main unit

Main Unit
Main Unit
(Approximately daily)
Soft cloth soaked ・ Toilet paper
in water ・ Dry cloth
・ Nylon scrubbing brush
(May cause damage.)
Unplug the power plug.
1
Wipe with a soft cloth that
2
has been soaked in water
and wrung-out thoroughly.
■For heavy dirt
• Wipe with a soft cloth soaked in diluted,
neutral kitchen detergent, and then wipe
with a soft cloth soaked in water.
・ Neutral kitchen detergent
Insert the power plug.
3
 The "Power" LED lights up.
Attention!
● The Washlet is an electric appliance. Be careful
not to let water seep inside or leave detergent in
the gap between the main unit and bowl unit. (May
damage plastic parts or cause a malfunction.)
● When using a toilet cleaner to clean the toilet,
rinse it off within 3 minutes and leave the toilet
seat and toilet lid open.
 
Wipe off any cleaner that remains on the bowl
unit. (If vapor from a toilet cleaner enters the
main unit, it may cause a malfunction.)
● Do not push or pull the covers around the wand
with undue force.
(May cause damage or malfunction.)
● Wipe the back surface of the toilet seat and
the toilet seat cushions with a soft cloth tightly
wrung out with water.
(Otherwise adhesion of dirt may result in discoloration.)
・ Paint thinner
・ Benzene
・ Powdered cleanser
10/5/2017 1:09:35 PM 10/5/2017 1:09:35 PM