Troubleshooting - Toto Washlet KM SW3036 Mode D'emploi

Troubleshooting

First, try the actions described on pages 42 to 45. If the problem
persists, consult the installer, seller or TOTO customer service
(see contact information on the back cover).
Is the Power LED lit?
Is the Energy Saver
LED lit?
Is the remote control
working?
42
M08049-1_EN.indd 42 M08049-1_EN.indd 42
Please check fi rst
■ Is the "Power ON/OFF" setting "OFF"?
Switch it to "ON" with the remote control. (Page 15 Step 2-2)
■ Is the power plug inserted?
Check whether there is a power outage.
■ While the LED is lit, energy saver
operation, so the toilet seat temperature may be reduced
or the heater may be turned off.
■ Is the "
" LED on the back
of the remote controller fl ashing?
Replace the batteries. (Pages 14, 38)
■ Is the remote control transmitter
or the remote control receiver
blocked?
Remove obstructions, dirt, water droplets
or any other blockages.
Remote control transmitter
CAUTION
If a water leak occurs,
close the shutoff valve.
Flat-head
screwdriver
Shutoff
valve
(Page 22, 23)
is in
The remote control
uses
to operate.
batteries
Remote
control
receiver
10/5/2017 1:09:43 PM 10/5/2017 1:09:43 PM