Preparation; Insert The Battery; Using The Product For The First Time - Toto Washlet KM SW3036 Mode D'emploi

Preparation

1. Insert the battery

1
Remove the
remote control
from the
hanger.
2
Open the battery cover and
insert two AA batteries.
Close
Open
● When batteries are properly loaded, all
the LEDs on the remote controll light up
for about 2 sec.
3
Mount the remote control in the
hanger.
■ About the batteries
Use dry cell, alkaline batteries.
Be sure to follow "Safety Precautions" to
prevent the batteries from rupturing or leaking
fl uid. (Pages 6 - 9)
14
M08049-1_EN.indd 14 M08049-1_EN.indd 14

Using the Product for the First Time

If the remote control is secured
1
Remote
control
Hanger
2
Battery cover
(for anti theft)
Remove the screw from the
remote control fi xture.
(View from side)
Remote control
Hanger
Screw
Remove
Phillips screwdriver
Remove the remote control
from the hanger.
■ To secure the remote control again
Tighten and fi x the screw.
(Overtightening may cause damage to parts
such as the hanger.)
Wall
10/5/2017 1:09:31 PM 10/5/2017 1:09:31 PM