Turn On The Power - Toto Washlet KM SW3036 Mode D'emploi

2. Turn on the power

1
Insert the power plug.
 The wand extends and then retracts.
2
Check that the "Power" LED is
lit up.
 When it is off , switch the "Power" to "ON".
To operate from the back of remote control
Press "Power ON/OFF" button about
3 seconds or longer.
To operate from the front of remote control
* Recommended if the remote control is
locked to prevent theft.
Press "Oscillating cleansing" button
about 10 seconds or longer.
<Power>
To turn the power "OFF"
Perform the same operation as step
above
 The "Power" LED goes off .
M08049-1_EN.indd 15 M08049-1_EN.indd 15
3. Open the shutoff valve
1
Fully open the shutoff valve.
Shutoff valve
2
Flat-head
screwdriver
10/5/2017 1:09:32 PM 10/5/2017 1:09:32 PM
15