Removal Of Display Panel - Toto Washlet KM SW3036 Mode D'emploi

Removal of Display Panel

To remove the display panel, follow the procedure below.
1
Unplug the power plug.
• The "Power" LED goes off .
2
Remove the remote control from the hanger.
(Page 14)
3
Remove the hanger and
display panel.
4
Screw the hanger on the wall.
5
Mount the remote control in the hanger.
6
Insert the power plug.
• The "Power" LED lights up.
To install back the display panel, follow the procedure above.
(Install the display panel at step
M08049-1_EN.indd 41 M08049-1_EN.indd 41
How to remove the display panel
4
.)
Screw
Phillips screwdriver
Hanger Display panel
41
10/5/2017 1:09:43 PM 10/5/2017 1:09:43 PM