Auto Power Off - Promax 27 Manuel

Modifiable parameters are next:
a) HOUR
It indicates the current time. Enter hour and minutes by alphanumeric keypad. To
enter the symbol ":" between hours and minutes, you should use the key
which is in the alphanumeric keypad.
b) DATE
It indicates the current date in European notation (dd-mm-yy). Enter the day, month
and year by the alphanumeric keypad. To enter the hyphen symbol between
numbers, press key
c) LANGUAGE
The language selected is the language usually used on the menus. Use the cursor
keys to scroll through available languages (English, Spanish, German and
Portuguese).
d) BIP
This parameter enables (ON) or disables (OFF) the acoustic indicator that beeps
when you press any key.
e) AUTO POWER OFF
This setting allows you to active (ON) or to disable (OFF) the auto power off
function. With this feature active, the instrument will automatically disconnect after
ten minutes without pressing any key.
f) IP NETWORK
It is the number used to identify the instrument within the network. You should use
the alphanumeric keypad to enter numbers that compose the IP address. You
should use the key
g) NETMASK
It is the number used to define the netmask. You should use the alphanumeric
keypad to enter numbers that compose the netmask address. You should use the
key to write a point between numbers.
h) GATEWAY
It is the number used to define the gateway. You should use the alphanumeric
keypad to enter numbers that compose the gateway address. You should use the
key to write a point between numbers.
Paragraphs f, g and h are needed to configure the Ethernet network connection.
At the bottom of the screen it appears the following information (no editable):
Page 16
that is in the alphanumeric keypad.
to write a point between numbers.
USER'S MANUAL. PROMAX-27
.,
09/2010