Audio Function - Promax 27 Manuel

USER'S MANUAL. PROMAX-27
At the bottom of the screen you will see next options:
SLM [F1]:
AUDIO [F2]:
SPECTRUM / SCAN [F3]:
LOGGER [F4]:
CHAN / FREQ [F5]:
If channel we are analysing is defined as digital, it will appear a warning message
on the screen. The message will be "Warning: CXX is defined as DIGITAL".
4.2.5.2.1

AUDIO function

To access the AUDIO function:
1.- Press key
2.- Press softkey TV [F2].
3.- Press softkey [F1] until you find ANALOG mode.
4.- Press softkey AUDIO [F2].
In analogue mode the PROMAX-27 allows obtaining a demodulated audio
signal and showing its characteristics.
09/2010
It leads to SLM mode.
It gets a demodulated audio signal (refer to section
4.2.5.2.1).
It goes to SPECTRUM mode (refer to section 4.2.5.4.2)
/ SCAN mode (refer to section 4.2.5.4.1).
Through this function you can store measurements in
the memory of the instrument for later viewing, printing
or transfer to a PC (refer to section 4.2.5.4.3).
Pressing this key you can navigate among editable
parameters. To change them, use the Cursor keys or
the alphanumeric keypad as appropriate. FREQ for
changing the frequency value of the tuned channel,
CHANNEL for changing the channel of the channel
plan.
[13].
Page 49