Auto Power Off - Promax 8 SE Mode D'emploi

Masquer les pouces Voir aussi pour 8 SE:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

USER'S MANUAL.
PROMAX-8
f)

AUTO POWER OFF

This field permits to activate (ON) or deactivate (OFF) the POWER-OFF function.
When this function is ON, the unit automatically turns off when it has remained
inactive for a period of 10 minutes.
g)
BEEP
This function permits to activate (ON) or deactivate (OFF) the
beeper. When it is on, it sounds on pressing any key or when turning the rotary
selector in order to alert the user.
h)
LANGUAGE
This field permits to select the language between: SPANISH, FRENCH, POLISH,
ENGLISH and GERMAN.
i)
EXTERNAL UNITS POWER SUPPLY (VLNB)
By means of the
to feed external units (MMDS antennas Multichannel Multipoint Distribution
Service in case of terrestrial television without cable wireless cable) by the
service connector.
This voltage will have to be provided externally by the power input [4] and to be
included in the margin from 21 to 25 V, in opposite case the instrument will not allow to
activate this function, displaying the message "Error VEXT " at the moment of the
configuration.
The activation or deactivation of VLNB takes place according to the described
process next:
Press repeatedly the key CONFIG until acceding to the second screen of
the configuration menu.
Turn the rotary selector until appears shaded line VLNB.
Press the rotary selector to activate the selection. Turning the rotary
selector, this one goes successively of OFF to ON.
Finally, to press the rotary selector to activate the configuration changes.
When surpassing the maximum LNB current consumption the output feeding
will be deactivated and LED (V
reactivate again the LNB voltage, after solving the cause of malfuction, it must be
access again to the instrument configuration according to the sequence previously
described.
07/2011
SE
GLOBAL
CONFIG : 2/2
AUTO POWER OFF
BEEP
LANGUAGE
VLNB
SW
Version 7.06
Figure 7.- Global configuration. 2/2.
PROMAX-8
SE
it is possible to provide the voltage necessary
) from frontal will blink during a minute. In order to
LNB
ON
ON
ENGLISH
OFF
PROMAX-8
SE
Page 17

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

8

Table des Matières