Installation; Power Supply; Operation Using The Mains Adapter; Operation Using The Battery - Promax PROLITE-105 Manuel D'utilisation

USER'S MANUAL. PROLITE-105
3

INSTALLATION

3.1 Power Supply

The PROLITE-105 is a portable instrument powered by a rechargeable Li-Ion
battery. The instrument comes with a mains adapter which enables the PROLITE-105
to be plugged to the mains for operation and battery charging.

3.1.1 Operation Using the Mains Adapter

Connect the mains adapter to the PROLITE-105 through the external power
connector [7] placed at the right side of the instrument. Then, connect the adapter to the
mains to start up battery charging. Next, press the ON/OFF
instrument starts working.
Before using the mains adapter make sure that it is the appropriate one for your
mains voltage.
The mains adapter is designed for indoor use.

3.1.2 Operation Using the Battery

Press the key ON/OFF
When the battery is full loaded, the PROLITE-105 has an autonomy aprox. of 25 hours
of continuous work in SEQ mode.
When the battery is flat, the instrument will not start up or, if working, will switch
off. The LOW BATT indicator [1] will be lit whenever the battery charge is low. Then a
charge process is required.

3.1.3 Battery Charging

First switch off the PROLITE-105 in order to charge the battery. Then connect the
power input to the mains adapter. Now connect the adapter to the mains. Now you can
observe that the indicator CHARGE
charging. Charging time depends on the state of the battery. If the battery is flat, the
battery charging time is 3 hours aprox. When battery is full loaded, the charge indicator
[6] changes to green.
CHG
03/2011
[3] to start the instrument powered by the battery.
[6] is lit in amber which indicates the battery is
CHG
[3] key. Then the
CAUTION
Page 5